Steel


Steel

Concrete by itself has a relatively low tensile strength which is why metal bars (rebar) or wire is used in masonry projects. By combining steel and concrete, the structure gains two types of strength – both tensile and compressive.

Steel products are vital in so many of the construction jobs and home improvement projects. That’s why we have many of the steel products you’ll need in stock. We know you’re eager to get to your job or project so you can pick up your steel supplies while you’re here getting your other supplies and materials.

Just ask our experienced staff if you have any questions or need help figuring out what you’ll need for your job or projects.

We Cut and Bend Rebar

Anchor Bolts

Anchor Bolts are used for attaching structures to concrete. The angled end is embedded in concrete leaving threads exposed. Hex nuts are included with the bolts.

Available at these locations:
Phoenix 602-944-4594
Buckeye 623-853-8300

Angle Iron

Angle Iron is structural steel bent at a 90 degree angle used to fasten or reinforce framing joints. It is used to support bricks over voids or open areas.

Available at these locations:
Phoenix 602-944-4594
Buckeye 623-853-8300

Block Lintels

Block lintels are a horizontal supporting member installed above an opening such as a door or window, that serves to carry the weight of the wall above it.

Available at these locations:
Phoenix 602-944-4594
Buckeye 623-853-8300

Brick Ties

Brick ties are nailed to the wood frame of the building and then bent outward to be embedded in the mortar between brick courses. They are typically installed every 5 or 6 courses. They are galvanized and will not rust or corrode

Available at these locations:
Phoenix 602-944-4594
Buckeye 623-853-8300

Chicken Wire

Chicken Wire is a hexagon shaped woven metal netting used as reinforcement of Portland cement mortar beds. It is also used in stucco application. It complies with ASTM A-641.

Available at these locations:
Phoenix 602-944-4594
Buckeye 623-853-8300

Concrete Wire

Steel Mesh Roll to reinforce and provide strength to concrete slabs and to control cracking. The welded design offers improved reliability. Welded together in a square grid and made from steel.

Available at these locations:
Phoenix 602-944-4594
Buckeye 623-853-8300

Ladur Wire

Ladur wire is a galvanized ladder type material is manufactured from 9 gauge side Rods and Cross rods, conforming to ASTM A641, Mill Galvanized with properly deformed side rods to provide maximum mortar bond.

Available at these locations:
Phoenix 602-944-4594
Buckeye 623-853-8300

Metal Lath

Metal Lath is a metal wire mesh that is applied to a wood or metal framework as matrix over which stucco or plaster is applied.

Available at these locations:
Phoenix 602-944-4594
Buckeye 623-853-8300

Nails

Concrete Nails are used for fastening to any type of concrete or masonry work. Pre-drilling may be necessary for some applications.

Available at these locations:
Phoenix 602-944-4594
Buckeye 623-853-8300

Rebar

Steel reinforcing bars, known as rebar, are most commonly used to provide structure and tension support in concrete structures. The surface of the bar is patterned to provide a good contact area for concrete adherence.

Available at these locations:
Phoenix 602-944-4594
Buckeye 623-853-8300

Tie Wire

Tie wire is a very pliable and durable steel wire, that is used to tie steel reinforcing bars (rebar) together.

Available at these locations:
Phoenix 602-944-4594
Buckeye 623-853-8300

Steel Studs

Steel studs are perfectly straight, don’t shrink or split. They’re light, easy to store, resist fire, insects and rot.

Available at these locations:
Phoenix 602-944-4594
Buckeye 623-853-8300